Fix the L Button using a PSP

Sony's handheld the game console ., the PlayStation Portable (PSP), gives you take your gaming on the go. Unfortunately this can indicate it really is suffering from significant wear and tear also. The PSP has two shoulder buttons on the the surface of the device, designated since the "L" and "R" buttons. These shoulder buttons are used in a variety of games, particularly first- and third-person shooters. Consequently they take quite beating over time. If your "L" button is cracked, broken or unresponsive, the perfect solution is usually to throw open your PSP and change it out. The guide is founded on the newer PSP 3000, though the procedure is comparable for your older PSP 1000 and PSP 2000 models.



Instructions

1. Buy a safe PSP opening tool plus a replacement "L" button. Unfortunately, most online retailers only sell two packs of "L" and "R" buttons. Certainly this means you then have a replacement "R" button if breaks later. Make reference to the time for online PSP PSP 2000 Repair Parts.

2. Press the discharge first turn on the left side in the PSP and remove battery cover. Takes place fingers to pry out your battery. Scrape off the Sony warning label from the battery bay.

3. Get rid of the four screws about the back panel from the PSP. There's 2 within the battery bay and also on the right side in the device.

4. Take away the two screws within the sides from the PSP's USB port. Get rid of the single screw on the bottom of the PSP.

5. Takes place PSP soft opening tool to carefully pry the faceplate off your PSP. Set the faceplate facedown negotiable. You'll use it later to guard your LCD screen.

6. Push the menu bar, located across the bottom on the LCD screen, to the correct to disengage the release tab on the LCD screen.

7. Don a couple latex gloves to counteract leaving fingerprints for the LCD. Elate the superior of the LCD screen and gently pivot it toward you. When the screen is perpendicular on the PSP, disconnect the screen cables on the logic board. Lift the sieve from the PSP make it face-down about the faceplate to defend it.

8. Locate the "L" button within the top, left corner with the PSP. Get rid of the single screw that holds it in place.

9. Use tweezers to remove the white plastic bracket coupled to the "L" button. Lift the "L" button outside the PSP.

10. Open your new "L" button and insert it in the PSP. Replace the white plastic bracket and retaining screw.

11. Reassemble your PSP using previous levels in reverse order. jklzaeqc 1031